How to install and remove the bar chair?

I have seen a lot of modern decorative style renderings. A bar with two to three bar chairs will be installed between the dining room and the living room. Especially for young singles, the bar will not only save space but also reflect the bar vibe of young people at parties or get-togethers. The bar is usually customized for decoration and installed differently than the office chairs. Here is the installation, disassembly, and movement of bar chairs.

Here is the content list:

Bar chair installation

Bar chair disassembly

Bar chair movement

Bar chair installation

Bar chair installation step one: understand the structure of the bar chair

Bar chairs are usually composed of three parts, one is the seat cushion, a pressure bar (lift rod), a foot or tripod.

The second step in the installation of bar chairs: assembly of air pressure rod and feet

Bar chair installation is similar to office chair installation, first, the part of the air pressure rod connected to the seat cushion is the hole in the middle of the foot bar (tripod).

Bar chair installation step three: install the pad

Insert the hole at the bottom of the bar seat pad into the air pressure rod, and then rotate it a few turns, and finally, adjust the handlebar at the bottom of the bar chair pad to see if the air pressure rod can adjust the height normally.

Bar chair disassembly

After reading the installation process, you know that the structure of the bar chair is very simple, so disassembly is very simple. First, the bottom of the bar chair upside down, the chair off the ground, and use a hammer, to avoid damage to the chair, please hit the bottom of the large head of the air rod, in the upper part of the chair under the combined effect of gravity, inertia, and impact, the air rod can be separated from the chair feet by several impacts several times.

Then grab the air rod, pry open the bar chair, let the chair off the ground, and then hit the metal tray (base) at the bottom of the pad with a hammer. Thus, under the combined effect of gravity, inertia, and impact of the upper part of the bar chair, the air rod separates the metal tray at the bottom of the mat.

Bar chair movement

The first step is to turn the barstool upside down and move it up off the floor. It is also a good idea to wrap some cardboard around the hammerhead to prevent the bar chair from damaging the bottom of the head of the air valve stem. With the combination of gravity, inertia, and the impact from the top of the chair, the air stem can be separated from the legs of the barstool with a simple stroke.

In the second step, grab the air shaft, turn the chair upside down, lift it off the floor, and hit the metal tray (base) at the bottom of the pad with a hammer. In this way, gravity, inertia, and the impact from the top of the chair separate the air rod from the metal tray at the bottom of the mat.

Foshan Runzhi Furniture Co., Ltd's bar chairs are easy to install and remove.