Custom leisure chairs need to pay attention to what?

Modern life for leisure tables and chairs have long been unfamiliar, especially for imported leisure chairs, most families will almost have to buy some leisure chairs, placed at home is also a landscape, of course, for users who choose custom furniture leisure chairs are also essential household furniture. So how much do you know about leisure chairs? Custom leisure chairs and need to pay attention to what issues? Follow us below to get to know it. Attached is also attached to the notes on the installation of leisure chairs.

Here is the content list:

Customized notes

Installation notes

Customized notes

Look at the details

Quality comes from the details. Due to the different factory equipment and technology, leisure chair details are also different. Mainly pay attention to two points, one is to see whether the steel pipe is rough with burrs; secondly, to see whether the "active joints of the steel pipe" have a rounded treatment. If you ignore these details, the use of the process will be easy to be sharp burrs or sharp corners scratching hands and feet.

Look at the workmanship of the leisure chair

The surface of the steel tube is treated with a plastic spraying process, high hardness, more wear-resistant, more lustrous. If the process of baking paint, the steel surface is more likely to produce scratches, resulting in easy oxidation and rust, and no luster. If you are still difficult to imagine the process of spraying, then you know the senior security doors, its surface treatment will use the spraying process. So, when you customize it can be customized according to your needs.

Look at the material of the leisure chair

One thing to note is that some products to be able to achieve a certain weight, will be some cut off the scrap foot or small sections of the pipe stuffed into the steel pipe to achieve the purpose of weight gain. Such a leisure chair is very easy to bend the steel pipe, you need to pay attention to more than one eye.

Look at the weight of the leisure chair

The core of the quality of the leisure chair is the mainframe structure. How to determine, the most intuitive way is to see the weight. The same style, heavier, means that the steel material is thicker without cutting corners.

Installation notes

Leisure chair checks no problem, find the screws tied to the chair feet accessories will be ready to start the installation work before we have to have the prerequisite preparations, first of all, you have to have the installation of the place second, you have to need to install the tools, such as electric drill, ruler last and most important, is not to forget the installation site to cement or slate ground to work, not directly planted in the mud. Now we are ready to start the installation first determine the location of the chair 4 chair feet fixed, marked well, and then use the electric drill to drill a hole 8-10MM diameter, and then the expansion screws knocked in. Then the chair hole in the screw rod, the nut cover fixed. Don't forget to use the plate hand to fasten. Finally, wash the dust on the chair and check if there is any paint falling off, if you need to repair it should be repaired in time.

Foshan Runzhi Furniture Co., Ltd reminds you that you need to pay attention to the above matters when customizing the leisure chair.